With a purpose to reduce emissions from wood stoves also to tally with the new environmental regulations, today wood fireplace inserts utilized the advanced combustion technology that was developed in both the united states and Canada. To make sure more complete combustion of the wood and smokes, a secondary combustion was included in this new technology to raise the fireplace operating efficiency and also to lower the amount of emission escaping from the firebox.

The brand new wood fireplace inserts use two separated preheated path of combustion air, one of the air sources feeds instantly into the wood burning and the other one is aimed above the primary fire to capture and ignite the imperfect combustion gases that would well be released up the chimney.

The advantage of using dual combustion air path:

* This dual combustion air path synchronized zone and flame patters in the wood fireplace insert

* Minimize the emissions by ten fold compared to a normal fireplace

* Free up the low levels of creosote and incomplete combustion products, and eliminate the potential for chimney fires.

With a purpose to allow much of the infrared heat to be transmitted to the room, wood fireplace inserts using advanced combustion technology included airtight, gasket doors, and special ceramic glass windows. And to allow easy viewing of the fire, a hot air blower used if you want to sweep the window with air.

This new wood fireplace inserts have a better heat exchange property than regular fireplaces because room air is drawn with a fan via a grill under the firebox then sent through a heat exchanger and back into the room at the top of the fireplace. If you want to send the heat to the rest of your home, the heat can be ducted to adjacent rooms while auxiliary fan can send it through ducts.

The chances of combustion products leaking to the house are minimal as these wood fireplace inserts have such little interaction with the place air. For better safety and effectiveness, the outdoor air is supplied directly to the fireplace for combustion and the maze currently in use for preheating the air before it goes into the firebox is built to keep the combustion gases from getting away. The amount of energy efficiency might be around 50% to 70% in a normal installation and when installed in a major living area with an open view to other parts of your house might be higher. The insert can offer much of the heating needs for the entire house and also can lower monthly heating bills.

The wood fireplace inserts offered the energy independence. This wood fireplace insert could run as heat source for the house even with the power failure. However the heat through the fire will radiate from the fireplace to the house by natural because the electric circulating fan will not run.

Learn more about wood fireplace inserts. Stop by Erwan Go’s site where you can find out all about pellet stove and what it can do for you.

Related posts:

1. Using Wood Burning Fireplace Inserts For Your Home Wood burning fireplace inserts are designed to transform inefficient fireplaces...
2. Gas Fireplace Inserts The existing wood burning fireplace can be replace by Gas...
3. Pellet Stove Inserts Are Excellent Choices As A Supplemental Heating Solution Alternatively heating solution, Pellet stove insert is exceptional choice. It...
4. Fireplace Accessories Can Be A Great Addition To Your House Fireplace Accessories are a great addition to your house and...
5. Sitting By The Mantle Of Your Wood Or Electric Fireplace Mantle Prefabricated metal fireplaces, in various designs and sizes, give the...

Related posts brought to you by Yet Another Related Posts Plugin.